Produktai skirti prekės grąžinimo atostogų metu (244)

Can be successfully used für the prodution of all concrete block products made of earth-moist cncrete, such as paving stones, slabs, embankment stones, palisades, etc. -reduces the tendency towards lime efflorescence and ferrous efflorescence/discoloration - intensifies the color effect and improves color stability -provides a good anti-adhesive effect -provides increased weather resistance (freeze / thaw resistance) -provdes very good surface and side sealing

Improvement of compaction and strength of conncrete products, colour enhancement, efflorescence control, reduced water absorption, esp. coloured concrete paving stones. Synthetic high-performance plasticizer with colour enhancing, efflorescence reducing and water repellent components; results in dense sides and surface, strength increase with possibility of cement reduction.

It has been especially developed for the production of colored concrete block productsmade of earth-moist concrete and combines multiple mechanisms. PAVELITH® AP 600 can be successfully used in concrete block products made of earth-moist concrete, such as paving stones, slabs or gardening products, as well as in mixtures of plastic consistency , such as wet-cast products. - intensified color effect - improved color stability - enhanced color brilliance - minimized primary and secondary efflorescence - reduced atmospheric water absorption - very good side and surface sealing - greatly reduced tendency for sticking

High-performance superplasticizer for medium-slump, high-slump and self-compacting concrete (SCC) with high early-strength and good slump retention for concrete precast applications. Very strong increase of workability and/or reduction of w/c-ratio; high early-strength development; good slump retention.

Application: Inline after curing or after surface treatment with active IR- and UV-curing; available for spraying and for roller application. weather resistance tested by BAM Colour-enhancing, strongly oil-, water- and dirt-resistant impregnating sealer for high-quality, easy-to-clean concrete products. Water-based, high alkaline and water resistance, high UV- and weather resistance, high block resistance, results in brilliant and permanent colours, reduced efflorescence, reduced staining, easy-to-clean properties, silk-matt to slightly glossy appearance depending on amount of sealer applied.

Proved, versatile release agent for moulds of wood, coated boards, steel and plastic. Sticks excellent on moulds, easy and clean mould release, for high-quality surface finish.

Application: Inline after curing or after surface treatment with active UV-curing, roller application. UV-curing top-coat for two-layer UV-curing coatings. 100% UV-curing polymer coating, strong colour-intensifying effect, high alkaline and water resistance, high block resistance, reduced staining, easy-to-clean properties.

It’s an efflorescence-reducing and waterpoofing sealant with a pearling effect, designd to permanently reduce the capillary water absorption of concrete block products. Can be successfully used for the production of all concrete components and concrete block products made of earth-moist concrete such as paving stones, slabs (pressed or cast), embankment stones, dry masonry wall systems, palisades, roof tiles and other products. - remarkabe protection against water absorption - strong water pearling effect - improved frost and freeze-thaw resistance - reduced tendency for efflorescence and greening - enhanced color brillance and color retention - higher durability

It has been especially developed for the production of colored concrete block productsmade of earth-moist concrete and combines multiple mechanisms. PAVELITH® AP 600 can be successfully used in concrete block products made of earth-moist concrete, such as paving stones, slabs or gardening products, as well as in mixtures of plastic consistency , such as wet-cast products. - intensified color effect - improved color stability - enhanced color brilliance - minimized primary and secondary efflorescence - reduced atmospheric water absorption - very good side and surface sealing - greatly reduced tendency for sticking

Innovative Produktlinie zur Desinfektion von Flächen, Händen und Textilien. - Wasserbasierte Formulierung. Innovative, hautfreundliche Wirkungsweise. Sofortige Desinfektion und lang anhaltender (30 Tage!) Kontaminationsschutz in verschiedenen Darreichungsformen (Spray, Tücher, Waschzusatz, Schaum). Breite, belegte Wirksamkeit gegen Bakterien, Viren und Pilze. Besondere Eigenschaften: Die Produkte arbeiten hautschonend auf wässriger Basis alkoholfrei. Die Produkte bilden nach dem Trocknen eine langanhaltende Schutzschicht aus. Diese Schicht zerstört Keime (Bakterien, Pilze, Hefen und Viren) mechanisch während die Haut nicht beschädigt wird. Daher können Keime nicht resistent werden. Sowohl Wirksamkeit, als auch Sicherheit der Produkte wurden ausgiebig getestet, die Ergebnisse - auch gegen problematische, resistente Keime - sind beeindruckend und können zur Verfügung gestellt werden! Besonders hervorzuheben ist die langanhaltende Wirkung von bis zu 30 Tagen auf Oberflächen und von bis zu 24 Stunden z.B. auf den Händen. Erfolgreich gegen COVID-19 getestet. Produkt:Wasser-basiertes Desinfektionsmittel Aggregatzustand:flüssig Anwendungsmöglichkeiten:Spray, Schaum, Aufdampfen, Wischen Nutzen:Flächen-, Hand- und Textildesinfektion

Specially for paving blocks, kerb-stones and masonry blocks. Synthetic special-admixture, decreased efflorescence, colour enhancement, dense side- and surface finish, decreasedsticking at the tamper head, considerable improvement of freeze-thaw-resistance.

Proved, versatile release agent for moulds of wood, coated boards, steel and plastic. Sticks excellent on moulds, easy and clean mould release, for high-quality surface finish.

Can be successfully used for the production of all concrete block products made of earth-moist concrete, such as paving stones, slabs, curbstones, garden stones, bricks made of pumice, LAVA, LECA or similar. - higher water absorption - significantly better workability and greater compactibility - improved filling prperties - increased strength - higher freeze-thaw resistance -cement savings of up to 10-15% or higher share of pozzolanic additives possible - significantly improved appearance thanks to the closed concrete structure

concrete products. Increased impermeability and improved appearance thanks to a closed structure, reduced lime efflorescence and minimized atmospheric water absorption.

Increase of freeze-thaw resistance, for road decks, bridge decks, and precast elements (barrier walls, steps etc.); improvement of workability and reduced bleeding, especially in concretes with low amounts of fines. Creates a system of stable micropores of defined size and distribution in concrete; increases flexibility and improves workability.

Available as water-dilutable concentrate or as ready-to-use emulsion for wood shuttering and for wooden or plastic boards in concrete products manufacturing. Very economic in use, mineral oilbased, very economic in use, easy and fast demoulding, smooth and flawless surfaces.

Special release agent for production boards made of wood and plastic1) during concrete block finishing. (1) impact assessment possibly required.) Significantly reduced the adhesion of coating materials, protects the production board, softens excess coating residues making clean-up easier, environmentally friendly, since it is biodegradable.

Maintenance oil for machines, mixers, moulds and mixings trucks, significant reduction of cleaning time, extends lifecycle of treated machines. Very good sticking, strong releasing effect, facilitates fast and easy cleaning, contains additional corrosion-inhibitors.

Predominantly in coloured concrete-products for the garden and landscape gardening, like palisades, planting stones, tamping flags (e.g. RINO). Water-repellent, efflorescencereducing and colour-intensifying.

Highly effective water-repellent concentrate for concrete products, mainly for polymer-sealed or coated concrete products. Very strong water-repellent effect, reduction of capillary water absorption and atmospheric water absorption, minimizes efflorescence.

Special plasticizer for instantly demoulded concrete products made from zero-slump concrete, like paving stones, kerb stones and pipes. High efficient plasticizer for highest strength at low cement levels.

Has been especially developed for the production of colored concrete block products from earth-moist concrete and combines multiple mechanisms. Can be successfully used for the production of all concrete block products made of earth-moist concrete, such as paving stones, slabs, embankment stones, palisades, etc. -minimization of primary and secondary efflorescence -intensifies the color effect and improves color stability -features a strong plasticization effect -higher density of concrete blocks -good side and surface sealing -reduced tendency for sticking

4-Androsten-3,17-dion “4-AD” gehört zur Gruppe der Steroidhormon-Derivate. Das Intermediat findet Anwendung in der Pharma- und Veterinärindustrie. Zwischenprodukt für: Eplerenone, Exemestane, Formestane, Penmesterol, Spironolactone Name:4-Androsten-3,17-dion Synonym:4-AD CAS Nummer:63-05-8 Nutzung:Pharma / Veterinär Zwischenprodukt

Premium oil-, water-, dirt- and stainproof impregnating sealer for high quality concrete products, frequently used for surface-treated (shotblast, ground, bush-hammered) concrete paving blocks and slabs. Water-based, strong water beading and oil beading effect, superior easyto- clean effect.

Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products, frequently used for surface- treated (shotblast, bush-hammered, brushed) concrete products. Water-based, fast-drying, strong and long lasting water beading and oil beading effect and easy-to-clean effect.

High-performance superplasticizer for medium slump and high slump concrete with good slump retention and very high early strength for precast application. Very strong increase of workability and/or reduction of w/c-ratio; very strong plasticizing effect even with high amounts of fines; high increase of early strength.

Increase of freeze-thaw resistance, for road decks, bridge decks, and precast elements (barrier walls, steps etc.); improvement of workability and reduced bleeding, especially in concretes with low amounts of fines. Creates a system of stable micropores of defined size and distribution in concrete; increases flexibility and improves workability.

Special plasticizer for instantly demoulded concrete products made from zero-slump concrete, like paving stones and kerb stones. Synthetic plasticizer with internal curing by high water-retaining capacity, decreases sticking at the machine stamp.

Highly effective water-repellent for concrete products. Strong water-repellent effect, reduction of capillary water absorption and atmospheric water absorption, minimizes efflorescence.

Produktinformationen "Pytes HV48100 Controller" Der Pytes HV48100 BCU (Battery Control Unit) ist das Herzstück des Pytes Hochvoltbatteriesystems. Er steuert und überwacht die gesamte Batteriebank, indem er kritische Parameter wie Spannung, Strom und Temperatur reguliert. Der Controller ermöglicht es, bis zu 15 Batteriemodule in Reihe zu schalten, wodurch eine Systemkapazität von bis zu 76,8 kWh erreicht wird. Mit seiner robusten Bauweise und der umfassenden Kommunikationsschnittstelle ist der HV48100 BCU ideal für industrielle, kommerzielle und private Energiespeichersysteme geeignet. Hauptmerkmale: Breites Spannungsspektrum: Unterstützt Systemspannungen von 200 V bis 870 V für maximale Flexibilität. Effizienter Energieverbrauch: Eigenverbrauch des Controllers liegt bei lediglich 7,56 W. Vielseitige Kommunikation: Ausgestattet mit CAN, RS485 und WiFi für die Verbindung zu Wechselrichtern und Energiemanagementsystemen. Produktnummer:151201100055 Hersteller:Pytes Lagerbestand:1